14

year

Follow us :

Materials and performance of the ceramic silk screen glass

time2012/04/17

Remodeling usually need to replace your kitchen cabinets. However, if this option is too expensive, you can choose to just replace the doors. tempered glass you may want to consider an option is to build a cheap price, high-end appearance of the glass insert doors.
1 Remove the old cabinet doors, if you have not deleted, they have. Use an electric drill to remove held in place on the door hinge screws.

2Two measurements, the Poplar determine the length, you will need the height and width of the existing cabinet doors.


3Measure and mark poplar, you need to cut to length. You will use the four poplar for each door.

4 Use the miter saw to cut pieces of poplar. A miter saws will provide accurate cutting every piece of wood.

5Build the framework for each door. To create a lap joint, each piece of wood connected together. Miter saws and chisels to create a lap joint (see Resources). Measuring 3 inches each side, each piece will be refreshed when they put together.

6Wood piece together using wood glue and clamps. Glue lap, and smooth brush.

7 ensure that the frame is square to place a framework for the development side. Adjustments need framing square meters of framework. Clip, the framework until the glue dries.

8 Silkscreen printing glass use a router to create a remove sharp edges within the framework of the rounded edge. You also need to create a grade on the glass insert within the framework.

9 will enter the router bit of the notch, and open the back of the frame. Around the frame to create an insert router running within the gap of the glass.

10 parts of glass into the frame on the back.

11 wood cut into small strips, will be held within the framework of appropriate place to insert the glass. With small nails or brads additional box.

12 Ceramic silk screen glass door hinge connection and additional cabinet doors.